This is a simple guide on how to add a Custom map to your Rust server:
1. Firstly you need to upload your .map file to Dropbox https://www.dropbox.com/
2. You will get given a link for your map such as this: https://www.dropbox.com/s/7a894a8wf498a4f4a84wf4/YOUR_FILE.map?dl=0
3. You need to change the ?dl=0 to ?dl=1 at the end of the link so the link will look something like this: https://www.dropbox.com/s/7a894a8wf498a4f4a84wf4/YOUR_FILE.map?dl=1
4. Once you have the modified link from the previous step go to your servers control panel
5. Click on the icon labeled Commandline Manager and select Custom Commandlines
6. Click New
7. On this page give the commandline a description such as "Custom Map"
8. Make sure you check all the select boxes on the left hand side for the options that you will be using such as "Hostname, RCon Password, Save Interval, Server description and most importantly have Additional Parameters selected.
9. In the Addition Parameters section add this line +server.levelurl "https://www.dropbox.com/s/7a894a8wf498a4f4a84wf4/YOUR_FILE.map?dl=1"
10. Click save at the bottom of the screen, and make sure that you have the new custom commandline selected as your main commandline.
11. You are now ready to start your server.
If you need any additonal help please make a support ticket: https://billing.low.ms/submitticket.php?step=2&deptid=1
Order your Rust server now here